About The Evitec-H Heat Pump Range
Evitec-H Heat Pumps are designed for heating or cooling water to be used in air-conditioning systems for residential, commercial or industrial use and features the most advanced multi-scroll technology currently used in the HVAC sector. The execution with injection steam compressors (Evitec-H) guarantees the production of hot water at high temperatures even in very hard outdoor conditions (up to -20°C).
According to the 2009/28/CE directive, establishing the national targets for the overall energy production from renewable sources, Galletti launches the new range of Evitec-H air cooled heat pumps with 10 different air to water reversible heat pump models, with cooling capacities ranging from 50 to 180 kW supplying hot water up to 65°C even at very low ambient temperatures makes Evitec-H the optimum solution for cooling, heating and domestic hot water.
Evitec-H units are featured with vapour injection (EVI) compressors, that allow extending the operation range of the heat pumps beyond the usual limits, increasing their seasonal (according to ErP 2009/125/CE) and spot efficiencies (A class in heating mode).
Evitec-H is Galletti’s new high eﬃciency multiscroll units equipped with R410A steam injection compressor. The range consists of 10 air-water models available as chiller and heat pump, with cooling capacities from 50 to 180 kW.
The main strongpoint of this series is the large operating ﬁeld, both in terms of maximum hot water temperature (65°C with -11°C of external air temperature) and minimum air temperature at which the continuous operation is allowed (-20°C). The range allows high conﬁgurability from an acoustic point of view, having a wide range of accessories designed to reduce noise emissions.
The advanced control, always present in the whole range, allows a continuous monitoring of the operating parameters, advanced adjustment logics, and connectivity. The modular structure with V conﬁguration condensing coils is designed to optimize air-side heat exchange, to ensure structural strength with a reduced footprint, and to maintain maximum accessibility to the basic components.
In addition to high eﬃciency in terms of nominal conditions (Eurovent A-class), in order to increase the eﬃciency at partial loads, the whole range consists of tandem solutions (2 compressors on a single refrigerant circuit).
The conﬁguration of units with the Hydro Smart Flow kit allows an increase of the eﬃciency and extends the working area of the cooling mode.
- Class A in heat pump operating mode
- Production of hot water up to 65°C
- Operation at full load with external air temperatures down to -20 °C
- High effciency under part load conditions
- Possibility to configure low-noise versions
- Counterflow solutions in every operating mode
- 10 models
- Heat pump
- Standard execution
- Low-noise execution
Three Simple Steps
Please contact us so we can help.
You can call us - use live chat - fill in the contact form - or email us and we will be delighted to help
Our technical sales team will help get the information needed to give you a quote. This can be done by phone or email or we can provide a free site survey
We will produce a detailed quotation which includes technical specifications and prices for your requirements and some options for an enhanced solution